Subtotal: ₹1,395
“Truzo UPVC SOLVENT CEMENT – 50ml Pack of 5 Adhesive (250 ml)” has been added to your cart. View cart
Showing 31–60 of 61 resultsSorted by popularity
Bondtite Epoxy Adhesives
Bondtite Epoxy Adhesives
Bondtite Epoxy Adhesives
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours