Subtotal: ₹8,000
		“Bondtite Fast and Clear | Bondtite Epoxy Adhesives | Astral Adhesive | 36g – Pack of 8” has been added to your cart. View cart	
Showing 31–47 of 47 resultsSorted by popularity
Bondtite Epoxy Adhesives
Bondtite Epoxy Adhesives
Bondtite Epoxy Adhesives
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
Filter Products
Filter by price
Recently Viewed Products
Fancy Cigarette Lighter
Shyam Sarowar brings for you Heating Torch Burner Size 4.
Model Number Is Brass Lpg Heating Torch Gun Flame Burner Set Propane Torch Burner No 4. Net Quantity Is 1. Suitable For Is Soldering, Welding, Brazing, Flame Cutting.Heating Torch Burner Size 4,Heating Torch Burner Specially for LPG Gun/Torch Gun for Soldering, Jewellery Melting, Suitable for a variety of tasks such as for Jewellery Making, Model Making, Crafting, Hobby Work, General Work Along With Other similar Handicrafts Processing And Repair Application.
Shyam Sarowar Rolinson Padlocks with Four Key
Shyam Sarowar Small Luggae Lock, Small Brass locks suitable for all kind of Luggage Lock, Tourist Lock, School Bag Lock
 
															 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									 
									















