Subtotal: ₹790
“Bondtite Fast and Clear | Bondtite Epoxy Adhesives | Astral Adhesive | 13g – Pack of 6” has been added to your cart. View cart
Showing 31–60 of 66 resultsSorted by popularity
Bondtite Epoxy Adhesives
Bondtite Epoxy Adhesives
Bondtite Epoxy Adhesives
Bondtite Epoxy Adhesives
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
How to use
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours