Brasso Metal Polish Liquid (100 ml) – Pack of 1 | Polish Liquid for Brass Copper Aluminium Sterling Silver Dazzling Glaze
Shyam Sarowar Brasso Polish
Description
Brasso Metal Polish Liquid (100 ml) – Pack of 1 | Polish Liquid for Brass Copper Aluminium Sterling Silver
Brasso Polish Liquid for Metal Surfaces, Brass, Copper, Aluminium, Sterling Silver, Stainless Steel and Gold., 100 ml each How to use it ?
1. Just take Brass/Zinc/Copper/Steel product you want to polish or clean.
2. Apply Brasso liquid through your finger.
3 Let the liquid Brasso get only 50% dry.
4. Take cotton cloth and start rubbing product until it cleans.
Important Note – Please don’t confuse, policing liquid doesn’t mean it will re polish your product. It just polish/Clean old product.
https://shyamsarowar.in/product/silvo-polish-liquid/
Additional information
| Weight | 0.15 g |
|---|---|
| Dimensions | 5 × 5 × 5 cm |
| Brasso Polish Liquid | Metal Brass, Copper, Aluminium, Sterling Silver polishing liquid |
| Metal Polish liquid | Shyam Sarowar |
1 review for Brasso Metal Polish Liquid (100 ml) – Pack of 1 | Polish Liquid for Brass Copper Aluminium Sterling Silver Dazzling Glaze
Related products
Recently Viewed Products
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours
- Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
- Wash glass and ceramic surfaces with soap and water then rinse and let dry.
- Pre-fit parts to be joined.
- Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement.
- Clamp it for 30 minutes.
- Full Strength will be achieved in 4 hours









Shyam Sarowar –
Good